+86-028-85255257
3GHz XFP-RF Optical Transmitter FTRFT-XUGxxxLG-T000
Features
Transmitter
Standard : 0 to +70¡ãC
Industrial : -40 to +85¡ãC
Applications
Absolute Maximum Ratings
Parameter |
Symbol |
Condition |
Min. |
Max. |
Unit |
Operating Temperature |
Tc |
0 |
+70 |
¡ãC |
|
Storage Temperature |
Tstg |
-40 |
+85 |
¡ãC |
|
DC OperatingVoltage£¨+3.3V£© |
VD |
+4 |
V |
||
DC Operating Voltage£¨+5V£© |
VD |
+6 |
V |
||
RF Input Power |
PRF |
5 |
dBm |
||
Relative Humidity |
HR |
95 |
% |
||
Pressure |
PR |
86 |
106 |
kpa |
|
ESD |
Human body model |
Class 1B |
Typical Specification
Parameter |
Test Condition |
MIN. |
TYP. |
MAX. |
Unit |
Frequency Range |
100M ~ 3G |
Hz |
|||
Gain (1) |
5 |
7 |
-- |
dB |
|
Ripple of Passband (1) |
100MHz ~ 3GHz |
-- |
¡À1.2 |
¡À2 |
dB |
Output Optical Power |
+25¡æ |
-- |
5 |
-- |
dBm |
Optical Isolation |
Double Isolator |
45 |
-- |
-- |
dB |
Side Mode Suppression Ratio |
30 |
-- |
-- |
dB |
|
Input Return Loss (1) |
100MHz ~ 3GHz |
-- |
-10 |
-8 |
dB |
P-1 (1) |
-- |
3 |
-- |
dBm |
|
SFDR (1) |
1.5GHz |
104 |
110 |
-- |
dB¡¤Hz2/3 |
Input IP3 (1) |
1.5GHz |
14 |
17 |
-- |
dBm |
Noise Figure (1) |
1.5GHz |
-- |
27 |
33 |
dB |
Power Consumption |
-- |
1.2 |
1.8 |
W |
|
Operating Voltage |
+3.3V,+5V |
VDC |
Note1: With SKYASTAR Optical Receiver. 1.0 m of SMF-28 single-mode fiber. Host system or chassis may degrade performance.
Connector
Type |
Connector |
RF |
Gold finger(100 ¦¸ differential or 50 ¦¸ single-ended into XFP-RF) |
Optical |
LC/APC |
Optical Fiber Type |
SMF-28(Standard) |
Data/Control |
Digital diagnostic functions via two-wire serial interface |
PIN Function
PIN |
Logic |
Symbol |
Name/Description |
note |
1 |
GND |
Module Ground |
||
2 |
NC |
NC |
1 |
|
3 |
LVTTL-I |
Mod_DeSel |
Module De-select; When held low allows module to respond to 2-wire serial interface |
|
4 |
LVTTL-O |
Interrupt |
Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial interface |
|
5 |
LVTTL-I |
TX_DIS |
Transmitter Disable; Turns off transmitter laser output |
|
6 |
VCC5 |
+5V Power Supply |
||
7 |
GND |
Module Ground |
||
8 |
VCC3 |
+3.3V Power Supply |
||
9 |
VCC3 |
+3.3V Power Supply |
||
10 |
LVTTL-I/O |
SCL |
2-Wire Serial Interface Clock |
|
11 |
LVTTL-I/O |
SDA |
2-Wire Serial Interface Data Line |
|
12 |
LVTTL-O |
Mod_Abs |
Indicates Module is not present. Grounded in the Module |
|
13 |
LVTTL-O |
Mod_NR |
Module Not Ready; Indicating Module Operational Fault |
|
14 |
NC |
1 |
||
15 |
GND |
Module Ground |
||
16 |
GND |
Module Ground |
||
17 |
NC |
1 |
FTRFT |
- |
X |
U |
G |
xxx |
L |
G |
- |
T |
000 |
Transmitter |
CWDM Laser Wavelength 270: 1270nm ¡¡¡¡¡¡¡.. 610: 1610nm |
Temperature Range T : 0 to +70¡ãC I : -40 to +85¡ãC |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.