尊龙凯时人生就是搏

±ê×¼¹âÄ£¿é

±ê׼ЭÒé¹âÄ£¿é

¼æÈÝЭÒé¹âÄ£¿é

ÆäËüÖÖÀà¹âÆ÷¼þ

ÊÖÒÕÖ§³Ö

400G-QSFP-DD-11

400G-QSFP-DD-11

0.0/5 rating (0 votes)

Description

Product Description
400G-QSFP-DD-11 is a 400GBASE-LR4 Multi-Vendor MSA Compatible QSFP-DD (Quad Small Form-Factor Pluggable – Double Density) Transceiver designed for operation over Double Fiber Single-Mode Fiber (SMF) optical cable. On the transmission side module converts 8x 50G 400GAUI-8 PAM4 (Pulse-Amplitude Modulation) electrical input channels (each 53.125Gbps) into 4 Single Lambda 100G PAM4 CWDM optical signals. Reversely the opposite is done on the receiving side, module converts 4 Single Lambda 100G PAM4 CWDM optical signals into 8x 50G 400GAUI-8 electrical inputs. Module has minimum guaranteed optical budget of 6.3 dB, which in most cases is enough to reach 10 km distance over OS2 single-mode fiber. However, distance is just indicative parameter for comfort of identification that is calculated by taking into account minimal optical budget and average attenuation of optical cabling in industry. 400G-QSFP-DD-11 uses top quality Quad channel EML driver and EML lasers together with an optical multiplexer (CWDM lines:1271, 1291, 1311, 1331) transmitter and 400Gb/s PIN photodiode array receiver. 400G-QSFP-DD-11 400GBASE-LR4 supports DDM/DOM optical diagnostics that provide real-time diagnostic information about the present operating conditions. 400G-QSFP-DD-11 operates in Standard 0°-70°C temperature range and has Double LC interface.
400G-QSFP-DD-11 400GBASE-LR4 QSFP-DD support up to 425 Gbps data rate and is designed for 400G Ethernet application. 400G-QSFP-DD-11 QSFP-DD Double Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular use cases are in Internet Service Provider (ISP), Mobile Operator and Data Center Core Networks.

Key Technical Data
Media Type:

Single-Mode Fiber (SMF.)

Connectors:

Double LC

TX Wavelength:

1270 nm, 1290 nm, 1310 nm, 1330 nm

RX Wavelenght:

1270 nm, 1290 nm, 1310 nm, 1330 nm

Minimum Optical Budget:

6.3 dB

Maximum Distance:

10km

Supported Data Rate:

425 Gbps

Supported Applications:

400G Ethernet (412.5Gbps)

DDM/DOM:

Supported

CDR (Clock and Data Recovery) chip

Supported

Forward Error Correction (FEC):

Host FEC Supported

Transmitter Type:

EML Laser

Tx Wavelength Bandwidth:

4 CWDM Lanes (73 nm 1264.50 – 1337.50nm) (L0 Tx center 1271nm, L1 Tx center 1291nm, L2 Tx center 1311nm, L3 Tx center 1331nm)

Average Launch Power (Min) Each Lane:

-2.8 dBm

Average Launch Power (Max) Each Lane:

5.6 dBm

Extinction Ratio (Min):

6 dB

Receiver Type:

PIN photodiode

Rx Wavelength Bandwidth:

4 CWDM Lanes (73 nm 1264.50 – 1337.50nm) (L0 Tx center 1271nm, L1 Tx center 1291nm, L2 Tx center 1311nm, L3 Tx center 1331nm)

Average Receiver Sensitivity (Min) Each Lane:

-9.1 dBm

Average Receiver Sensitivity (Max) Each Lane:

5.6 dBm

Receiver Overload:

5.5 dBm

Temperature Range:

Standard 0°-70°C

Storage Temperature:

-40° to 85°C

Relative Humidity:

0 to 85%

Power Consumption:

≤12W

Power:

+3.3V

Chipset:

Inphi

Compliance:

100G Lambda MSA, 400GBASE-LR4, IEC60825-1 Laser Safety Compliant, IEEE 802.3bs, QSFP-DD MSA, RoHS-6, CE

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search

sitemap¡¢ÍøÕ¾µØͼ