+86-028-85255257
40Gb/s QSFP+ Parallel Single Mode(2KM) to 8 x LC Connector Breakout Active Optical Cable
Features
¨ Full duplex 4 channel 1310nm parallel active optical cable
¨ Transmission data rate up to 11.3Gbit/s per channel
¨ SFF-8436 QSFP+ compliant
¨ Hot pluggable electrical interface
¨ Differential AC-coupled high speed data interface
¨ 4 channels 1310nm FP array
¨ 4 channels PIN photo detector array
¨ Maximum link length of 2km on G652single mode fiber (SMF)
¨ 8x LC connector(APC)
¨ Maximum power consumption 3.5W
¨ Housing isolated from connector ground
¨ 3.3V power supply voltage
¨ RoHS 6 compliant
¨ Case operating temperature
Commercial:0 ~ +70¡æ
Industrial:-40 ~ +85¡æ
Applications
¨ Infiniband Connectivity SDR/DDR/QDR
¨ 10/40Gigabit Ethernet
¨ 2/4/8 Gbps Fiber Channel
¨ Data Centers and Storage Arrays
Description
QSFP PSM TO 8xLC Breakout AOC are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and 40GbE PSM4. QSFP PSM TO 8xLC Breakout AOC is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at typical rate of 10.3125Gb/s, providing an aggregated rate of 41.25Gb/s.These breakout cables connect to a 40G QSFP+ port of a switch on one end and to four 10G SFP+ Transceivers of a switch on the other end.
Ordering information
Part Number |
Product Description |
FTCQ-4X-PSMIR4-8LC-xxx |
xxx=different cable lengthson G652single mode fiber (SMF),0ºC ~ +70ºC |
FTCQ-4X-PSMIR4-8LC-xxxI |
xxx=different cable lengthson G652single mode fiber (SMF),-40ºC ~ +85ºC |
xx(x) |
Cable Lengthon G652single mode fiber (SMF) |
03 |
003=3m |
05 |
005=5m |
10 |
010=10m |
20 |
020=20m |
50 |
050=50m |
100 |
100=100m |
1000 |
1000=1km |
2000 |
2000=2km |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.