+86-028-85255257
F Type pin Applicable Power 1-2mw
M Type pin Applicable Power 1-5mw
N Type pin Applicable Power 5-20 mw
The maximum output power of the 650nm pigtailed laser diode module can reach 20 mw, which is widely used in light sources and instruments.Different types of fibers and connectors can be customized based on customers' needs.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit |
| Fiber Output Power | Po(CW) | 20 | mW | |
| Forward Current(LD) | If(LD) | 180 | mA | |
| Reverse Voltage(LD) | Vr(LD) | 2 | V | |
| Forward Current(PD) | If(PD) | 2 | mA | |
| Reverse Voltage(PD) | Vr(PD) | 15 | V | |
| Storage Temperature | Tstg | -40 | 85 | °c |
| Operating Temperature | To | -10 | 60 | °c |
| Lead Solder Temperature | - | 260 | °c | |
| Lead Solder Time | - | 10 | s |
Optical & Electrical Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Unit |
| Output Power | Po | 1 | - | 20 | mW |
| Threshold Current | Ith | - | 15 | 20 | mA |
| Operating Current | If | - | 30 | 140 | mA |
| Operating Voltage | Vf | - | 2.3 | 3.0 | V |
| Monitor Current | Im | - | - | 500 | uA |
| Cent Wavelength | λc | 650 | - | 660 | nm |
| Spectral Width (RMS) | Δλ | - | 2 | 3 | nm |
| Spectral Shift | Δλ/ΔT | - | - | 0.2 | nm/°C |
| Fiber | SM (4um or 9um), MM, etc. | ||||
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
The maximum output power of the 30mw 1650nm pulse laser diode module for OTDR reaches 30~40mw, making it ideal for use in OTDR systems.
The 1310nm 1mw-4mw DFB Pigtail Laser Diodes have an excellent simulation performance due to the use of a DFB chip.The output power is controlled within 1 to 4 mw based on customer needs,which makes this laser module ideal for use in CATV,digital,and analog signal transmissions.
The 1310nm 8mw-10mw DFB high power pigtailed laser modules have an excellent simulation performance due to the use of the DFB chip. This laser module features a power output range of 8 to 10 mw,which makes it ideal for use in CATC,digital,and analog signal transmission.
The 1550nm 1mw-3mw DFB pigtail laser diode module has an excellent simulation performance due to the use of a DFB chip.The output power is controlled between 1 to 3 mw based on customer needs,making it ideal for use in CATV,digital and analog signal transmission.
The 1550nm 6mw-8mw DFB pigtail laser diode module has an excellent simulation performance due to the use of a DFB chip. The output power of this product ranges between 6 to 8 mw,and is widely used in CATV,digital and analog signal transmission.
The CWDM diode laser module is comprised of an uncooled quantum well DFB laser chip,built-in InGaAs monitor photodiode,4-pin coaxial pigtail type or plug-in type package,single-mode fiber coupling device,SC/APC or FC/APC optical connector,and built-in optical isolator.Its light source covers a wide wavelength range from 1270nm to 1610nm,totaling 18 wavelengths.Other typical values for the CWDM diode laser module are ±3nm for the spectral range, spectral bandwidth less than 0.2nm, maximum operating current 35MA,and output power range from 1MW to 3MW.This series of product is most commonly used in the WDM light source and communication systems,CWDM analog communication systems,CATV return-path transmission systems,and other analog transmission systems.
