• Hot-pluggable SFP+ footprint
• Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant ( lead-free )
• Single 3.3V power supply
• Maximum link length of 300m on2000 MHZ-km MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical interface
• Duplex LC Connector
• Built-in digital diagnostic functions
• Commercial temperature range£º 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)

1. Optical interface compliant to IEEE 802.3ae 10GBASE-LR
2. Electrical interface compliant to SFF-8431
3. Hot Pluggable
4. 1310nm DFB transmitter, PIN photo-detector
5. Operating case temperature: 0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
   
6. Low power consumption
7. Applicable for 10km SMF connection
8. All-metal housing for superior EMI performance
9. Advanced firmware allow customer system encryption information to be stored in transceiver
10. Cost effective SFP+ solution, enables higher port densities and greater bandwidth

1. Compliant with SFF-8431 and IEE802.3ae
2. Data rate selectable ¡Ü4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
3. Cooled EML transmitter and PIN receiver
4. link length up to 40km
5. Low Power Dissipation 1.5W Maximum
6. Operating Case Temperature£º0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
7. Single 3.3V power supply
8. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
9. RoHS compliant and lead free

1. Compliant with SFF-8431 and IEE802.3ae
2. Data rate selectable ¡Ü4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
3. Cooled EML transmitter and APD receiver
4. link length up to 80km
5. Low Power Dissipation 1.4W Typical (Maximum:2W)
6. Operating Case Temperature:0¡ãC to 70¡ãC(Standard), -40¡ãC to 85¡ãC (Industrial)
7. Single 3.3V power supply
8. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
9. RoHS compliant and lead free

F-tone Ϊ 25 Gbps ´®ÐÐͨµÀÍƳöÊ׸öÍêÕûµÄ zSFP+ »¥Á¬ÏµÍ³
£¬ÎªÐÂÒ»´úÒÔÌ«ÍøºÍ¹âÏËͨµÀÓ¦ÓÃÌṩ¾ßÓÐ׿Խ EMI ±£»¤µÄÎÞÓëÂױȵÄÐźÅÍêÕûÐÔ

zSFP+ SMT 20 µç·ÅþÁ¬Æ÷ºÍÆÁÕÏÕÖ×é¼þÌṩ¾ø¼ÑµÄÐźÅÍêÕûÐԺ͵ç´Å×ÌÈÅ (EMI) ±£»¤¡£

F-tone µÄ zSFP+ SMT ÅþÁ¬Æ÷Ö§³ÖµçÁ÷Ϊ 10 Gbps µÄÒÔÌ«ÍøºÍ 16 Gbps µÄ¹âÏËͨµÀÓ¦ÓÃ
£¬²¢Äܹ»Ö§³Ö¸ß´ï 40 Gbps µÄ´®ÐÐͨµÀ¡£Ê×Ñ¡µÄ½ÓºÏÉè¼ÆʹÓÃÕ­±ß¡¢ñîºÏä²å¡¢ÐγɽӴ¥µÄ¹¹ÐÍÒÔ¼°Ç¶¼þ³ÉÐÍ
£¬ÒÔÓÅ»¯µçÆøÐÔÄÜ¡£zSFP+ ÅþÁ¬ÓþßÓÐÓë SFP+ ÐÍʽÏàͬµÄ PCB ÁýÕÖÇø¡¢½ÓºÏ½çÃæÒÔ¼° EMI ÆÁÕÏÕֳߴç
£¬Ê¹ÆäÏòºó¼æÈÝ¡£

F-tone's FTCS-XX85-XX SFP+ transceivers are designed for use in Fibre Channel links up to 1.4 km at 8.5 Gb/s data rate.  These transceivers also support 4 km at 4.25 Gb/s and 10 km at 2.125 Gb/s. They are compliant with FC-PI-4 Rev. 8.00, SFF-8432 and SFF-8472 Rev 10.2, and compatible with applicable portions of SFF-8431 Rev 3.0.  The product is RoHS compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FN-2038.