800G 10km PLR8 OSFP Optical Transceiver

Product Description
F-tone Networks’s OSFP transceiver module is designed for use in 800 Gigabit Ethernet links over 10km single mode fiber. The module has 8 independent electrical input/output channels operating up to 106.25Gbps per channel. This transceiver consists of two transmitter/receiver units, with each operating on a set of wavelengths on the ITU G.694.2 CWDM grid at 1310nm. The transmitter path of the module incorporates a bi-directional PAM4 re-timer ASIC integrated with Silicon Photonics Laser and two 4-channel modulator driver. On the receiver path, used 8 photodiodes and two 4-channel TIA arrays, along with the PAM4 re-timer.

Features
¡ñ 0 to 10km over SMF with KP4 FEC supported at theHost side
¡ñ MPO-16 connector
¡ñ Triple Rate operation:
        106.25Gbps (PAM4)
        53.125Gbps (PAM4)
        26.5625Gbps (NRZ)
¡ñ Silicon Photonics 1310nm transmitter
¡ñ PIN and TIA array on the receiver side
¡ñ Power dissipation < 18W
¡ñ Case temperature range: 0°C to 70°C(commercial)
¡ñ Safety Certification: TUV/UL/FDA
¡ñ RoHS Compliant

Applications
¡ñ 8x100G Ethernet
¡ñ 2x400G Ethernet
¡ñ 1x800G Ethernet
¡ñ 2x200G Ethernet

±¾²úƷΪFT-AMϵÁУ¬½öչʾ²¿·Ö²ÎÊý£¬ÈôÓÐÐèÒª£¬ÇëÁªÏµ尊龙凯时人生就是搏¡£
×¢£º±¾²úÆ·ÓÐÌìϲú»¯ÐͺſÉÑ¡
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.