尊龙凯时人生就是搏

Contact Us：
+86-028-85255257
sales@f-tone.com

标准光�？�

标准协议光�？�

兼容协议光�？�

其它种类光器件

手艺支持

光�？橹�

CFP-SR10

CFP-SR10光�？�

0.0/5 rating (0 votes)

Specifications

产品型号: CFP-100G-SR10
兼容品牌: 全系列
封装类型: Up to 11.2 Gbps per channel bandwidth
传输速率: 103.125 & 111.810 Gbit/s Dual Rate Operation
传输距离: OM3 p to 300m and OM4 up to 400m
发射波长: 850nm
吸收波长: 10 channels 850nm VCSEL array
事情温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
数字诊断: 带DDM
吸收迅速度: 10 channels PIN photo detector array
吸收迅速度: 10 channels PIN photo detector array

Description

F-tone Networks 100G CFP Optical Transceiver Module

CFP-100G-SR10/CSR10XX

Features

Transmission data rate up to 11.2Gbit/s per channel
CFP MSA compliant
Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
Up to 11.2 Gbps per channel bandwidth,
OTU4 compatible
10 channels 850nm VCSEL array
10 channels PIN photo detector array
OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
MDIO digital diagnostic and control capabilities.
compliant to CFP MSA Management Interface Specification, Draft 1.4
TX input and RX output CDR retiming
Hot pluggable electrical interface
Power class 1 (<8W max)
Operating case temperature

Standard : 0 to +70°C

Industrial : -40 to +85°C

3.3V power supply
RoHS 6 compliant(lead free)

Applications

High-speed core router interlinks and data center aggregation
Test equipment

Description

The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting 100G Ethernet and PCIe. It is compliant with the CFP MSA and IEEE P802.3ba 100GBASE-SR10. F-tone Networks CFP SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.2Gbps per channel.

As shown in Figure 1, the transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry.

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage	Vcc	-0.3	3.6	V
Input Voltage	Vin	-0.3	Vcc+0.3	V
Storage Temperature	Tst	-20	85	?C
Case Operating Temperature	Top	0	70	?C
Humidity(non-condensing)	Rh	5	95	%

Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	3.13	3.3	3.47	V
Operating Case temperature	Tca	0		70	?C
Data Rate Per Lane	fd	-		11.2	Gbps
Humidity	Rh	5		85	%
Power Dissipation	Pm			8	W

Electrical Characteristics

Parameter	Symbol	Min	Typical	Max	Unit
Differential input impedance	Zin	90	100	110	ohm
Differential Output impedance	Zout	90	100	110	ohm
Differential input voltage amplitude	ΔVin	120		820	mVp-p
Differential output voltage amplitude	ΔVout	300		820	mVp-p
Input Logic Level High	VIH	2.0		VCC	V
Input Logic Level Low	VIL	0		0.8	V
Output Logic Level High	VOH	VCC-0.5		VCC	V
Output Logic Level Low	VOL	0		0.4	V

Optical Characteristics

Transmitter Optical Specifications (T = 25°C, VCC =3.3V +/- 5%)

Parameter	Symbol	Min	Typical	Max	Unit
Average Optical Power(per channel)	Pout	-8	-2.5	+1	dBm
Average Optical Power(per channel) - Disabled	Poff			-30	dBm
Optical Return Loss Tolerance				12	dB
Extinction Ratio	ER	3			dB
Center Wavelength	λc	840	850	860	nm
RMS Spectral Width	λ		0.5	0.65	nm
Transmitter eye mask	Compliant to IEEE802.3ba eye mask specification

Note：

1. Average optical power is measured at the output of the modules optical interface.

Receiver Optical Specifications (T = 25°C, VCC =3.3V +/- 5%)

Parameter	Symbol	Min	Typical	Max	Unit
Optical Power Sensitivity(per channel)	Pin min		-12	-9.9	dBm
Optical Power Saturation(per channel)	Pin max	+1			dBm
Stressed Receiver Sensitivity	P_S			-5.4	dBm
Center Wavelength	λc	840	850	860	nm
RMS Spectral Width	λ		0.5	0.65	nm
Optical Return Loss	Rl	12			dB

Note：

Optical power sensitivity is measured with BER@10>^-12 at 10.3125Gbps per channel.

Part A:Bottom Row Pin Function Definition

Pin	Symbol	Type	I/O	Description
1	3.3V_GND	GND		3.3V Module Supply Voltage Return Ground, can be separate or tied together with Signal Ground
2	3.3V_GND	GND
3	3.3V_GND	GND
4	3.3V_GND	GND
5	3.3V_GND	GND
6	3.3V	VCC		3.3V Module Supply
7	3.3V	VCC
8	3.3V	VCC
9	3.3V	VCC
10	3.3V	VCC
11	3.3V	VCC
12	3.3V	VCC
13	3.3V	VCC
14	3.3V	VCC
15	3.3V	VCC
16	3.3V_GND	GND
17	3.3V_GND	GND
18	3.3V_GND	GND
19	3.3V_GND	GND
20	3.3V_GND	GND
21	NC		I/O	F-tone Networks internal, do not connect
22	NC		I/O	F-tone Networks internal, do not connect
23	GND	GND
24	(TX_MCLKn)	CML	O	CML For optical waveform testing. Not used.
25	(TX_MCLKp)	CML	O	CML For optical waveform testing. Not used.
26	GND	GND
27	NC		I/O	F-tone Networks internal, do not connect
28	NC		I/O	F-tone Networks internal, do not connect
29	NC		I/O	F-tone Networks internal, do not connect
30	PRG_CNTL1	LVCMOS w/PU	I	Programmable Control 1 set via MDIO, MSA default: TRXIC_RSTn – TX & RX IC reset. “0” = reset, “1” or NC = enabled or not used
31	PRG_CNTL2	LVCMOS w/PU	I	Programmable Control 2 set via MDIO, MSA default: Hardware power Interlock LSB, “00” = <8W, “01” = <16W, “10” < 24W, “11” or NC = >24W or not used
32	PRG_CNTL3	LVCMOS w/PU	I	Programmable Control 3 set via MDIO, MSA default: Hardware power Interlock MSB, “00” = <8W, “01” = <16W, “10” < 24W, “11” or NC = >24W or not used
33	PRG_ALRM1	LVCMOS	O	Programmable Alarm 1 set via MDIO, Reflex default: HIPWR_ON, Module power on indicator. “1” = Module high power up completed, “0” = Module not high powered up
34	PRG_ALRM2	LVCMOS	O	Programmable Alarm 2 set via MDIO, Reflex default: MOD_READY, module initialization complete, “1” = complete, “0” = not complete
35	PRG_ALRM3	LVCMOS	O	Programmable Alarm 3 set via MDIO, Reflex default: MOD_FAULT, module fault detected, “1” = fault, “0” = no fault
36	TX_DIS	LVCMOS w/PU	I	Transmitter Disable for all channels, “1” or NC = transmitter disabled, “0” = transmitter enabled
37	MOD_LOPWR	LVCMOS w/PU	I	Module low power mode. “1” or NC = module in low power (safe) mode, “0” = power-on enabled
38	MOD_ABS	GND	O	Module Absent. “1” or NC = Module absent, “0” = module present. Pull-up resistor on Host
39	MOD_RSTn	LVCMOS w/PD	I	Module Reset. “0” = reset the module, “1” or NC = module enabled, Pull Down resistor in module
40	RX_LOS	LVCMOS	O	Receiver loss of optical signal on any channel, “1” = loss of signal, “0” = normal condition
41	GLB_ALRMn	LVCMOS	O	Global Alarm. “0” = alarm condition in any MDIO alarm register, “1” = no alarm
42	PRTADR4	1.2V CMOS	I	MDIO port address bit 4
43	PRTADR3	1.2V CMOS	I	MDIO port address bit 3
44	PRTADR2	1.2V CMOS	I	MDIO port address bit 2
45	PRTADR1	1.2V CMOS	I	MDIO port address bit 1
46	PRTADR0	1.2V CMOS	I	MDIO port address bit 0
47	MDIO	1.2V CMOS	I/O	Management Data I/O bi-directional data (electrical specs as per 802.3ae)
48	MDC	1.2V CMOS	I	Management data clock (electrical specs as per 802.3ae)
49	GND	GND
50	NC		I/O	F-tone Networks internal, do not connect
51	NC		I/O	F-tone Networks internal, do not connect
52	GND	GND
53	NC		I/O	F-tone Networks internal, do not connect
54	NC		I/O	F-tone Networks internal, do not connect
55	3.3V_GND	GND		3.3V Module Supply Voltage Return Ground, can be separate or tied together with Signal Ground
56	3.3V_GND	GND
57	3.3V_GND	GND
58	3.3V_GND	GND
59	3.3V_GND	GND
60	3.3V	VCC		3.3V Module Supply
61	3.3V	VCC
62	3.3V	VCC
63	3.3V	VCC
64	3.3V	VCC
65	3.3V	VCC
66	3.3V	VCC
67	3.3V	VCC
68	3.3V	VCC
69	3.3V	VCC
70	3.3V_GND	GND
71	3.3V_GND	GND
72	3.3V_GND	GND
73	3.3V_GND	GND
74	3.3V_GND	GND

Part b:Top Row Pin Function Definition

Pin	Symbol		Pin	Symbol
148	GND		111	GND
147	Not used		110	Not used
146	Not used		109	Not used
145	GND		108	GND
144	Not used		107	RX9n
143	Not used		106	RX9p
142	GND		105	GND
141	TX9n		104	RX8n
140	TX9p		103	RX8p
139	GND		102	GND
138	TX8n		101	RX7n
137	TX8p		100	RX7p
136	GND		99	GND
135	TX7n		98	RX6n
134	TX7p		97	RX6p
133	GND		96	GND
132	TX6n		95	RX5n
131	TX6p		94	RX5p
130	GND		93	GND
129	TX5n		92	RX4n
128	TX5p		91	RX4p
127	GND		90	GND
126	TX4n		89	RX3n
125	TX4p		88	RX3p
124	GND		87	GND
123	TX3n		86	RX2n
122	TX3p		85	RX2p
121	GND		84	GND
120	TX2n		83	RX1n
119	TX2p		82	RX1p
118	GND		81	GND
117	TX1n		80	RX0n
116	TX1p		79	RX0p
115	GND		78	GND
114	TX0n		77	Not used
113	TX0p		76	Not used
112	GND		75	GND

Ordering information

Part Number	Product Description
CFP-100G-SR10	CFP 100G SR10, 100m on OM3 MMFand 150m on OM4 MMF;0 to +70°C
CFP-100G-CSR10	CFP 100G SR10, 300m on OM3 MMFand 400m on OM4 MMF;0 to +70°C
CFP-100G-SR10I	CFP 100G SR10, 100m on OM3 MMFand 150m on OM4 MMF;-40 to +85°C
CFP-100G-CSR10I	CFP 100G SR10, 300m on OM3 MMFand 400m on OM4 MMF;-40 to +85°C

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone Networks before they become applicable to any particular order orcontract. In accordance with the F-tone Networks policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

sitemap、网站地图