SFP+ Transceiver 10GBase-ER 10Gb/s DWDM, 40KM

Product Description
F-tone Networks's series single mode transceiver is small form factor pluggable module for duplex optical data communications. This module is designed for single mode fiber and operates at a nominal DWDM wavelength from 1528.77nm to 1563.86nm as specified by the ITU-T. It is designed to deploy in the DWDM networking equipment in metropolitan access and core networks. It is with the SFP+ 20-pin connector to allow hot plug capability. The transmitter section uses a DWDM EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses a PIN detector and a limiting post-amplifier IC. The DWDM-SFP10G-40 series are designed to be compliant with SFP+ Multi-Source Agreement (MSA) Specification SFF-8431.

Features:
¡ñ Operating data rate up to 10.3Gbps
¡ñ 1550nm EML Transmitter
¡ñ Distance up to 40km over SMF
¡ñ Single 3.3V Power supply and TTL Logic Interface
¡ñ Duplex LC Connector Interface, Hot Pluggable
¡ñ Compliant with SFP+ MSA Specification SFF-8431
¡ñ Compliant with IEEE 802.3ae 10GBASE-ER
¡ñ Compliant with IEEE 802.3ae 10GBASE-EW
¡ñ Compliant with SFF-8472
¡ñ Operating Case Temperature Standard: 0ºC~+70ºC

Applications:
¡ñ 10GBASE-ER at 10.31Gbps
¡ñ 10GBASE-EW at 9.95Gbps
¡ñ 1000 Base-LX Ethernet
¡ñ 8x FC at 8.5Gbps
¡ñ 4x FC at 4.25Gpbs
¡ñ 2x FC at 2.125Gpbs
¡ñ 1x FC at 1.0625Gbps
¡ñ Other optical links

Order Information:

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.